Oct 11, 2023 · I recently got a 1 mm nozzle for my Ender pro three and have been attempting to do some larger prints, but keep suffering from the same ...
11 hours ago · I think it's over-extrusion. So either too high heat, flow rate is too fast, or moving too slow? Although it is also weird that you're ...
Missing: 17506ty/ help_with_10mm_nozzle_please/
Dec 29, 2022 · Mine curled then stuck to the nozzle at a weird angle and let enough space open where the filament could keep pushing up the hotend, heatbreak , ...
Missing: 17506ty/ help_with_10mm_nozzle_please/
Feb 26, 2024 · Started noticing some additional stringing in my print and some brown pieces ( I'm guessing burnt or something) in my prints.
Missing: 17506ty/ help_with_10mm_nozzle_please/
Sep 30, 2023 · 190 is too low for a .6 nozzle the lowest I've printed at was 195 with a .4 nozzle. And turn the extrusion up .92 for a .6 nozzle seems like not ...
Missing: 17506ty/ help_with_10mm_nozzle_please/
3 days ago · Okay that's fine, I think the bed adhesion is probably what caused it, the print detached and then got stuck to the nozzle. Have you been using ...
Missing: 17506ty/ help_with_10mm_nozzle_please/
2 days ago · I am a newbie to filament printing, had a resin printer for some time, but it's quite different. I am looking for some advice.
Missing: 17506ty/ help_with_10mm_nozzle_please/
Sep 24, 2022 · The 0.4 nozzles are only 0.4 for 0.66 mm, the nozzle is 2mm almost right to the tip where it it tapers with a 62 degree cone to 0.4mm.
Missing: 17506ty/ help_with_10mm_nozzle_please/
Nov 10, 2022 · hi guys I f upped real bad, I changed my nozzle and managed to rip one of the small copper traces on the heat block.
Missing: 17506ty/ help_with_10mm_nozzle_please/
In order to show you the most relevant results, we have omitted some entries very similar to the 9 already displayed.
If you like, you can repeat the search with the omitted results included. |